zdravim Prodance Blava. vcera som bol u vas a mali sme mensi pokec
ohladom EAW LA400, pricom som hovoril, ze LA400 a BH760 maju rovnaky
menic a za istych podmienok moze splnat parametre 800 w RMS. tu je
dokaz z fora EAW, vyjadrenie predstavitela EAW, plus link na samotny menic v Prodance, kde je v popise uvedeny aj BH760 aj LA400.
enjoy :)


O.K.
To clear the air a bit...

The Driver in the LA400 is the same driver that is in all of our horn
loaded subs (KF940, DCS2, BH760 etc...).
This is a VERY special driver that has been designed specifically to
work in a horn loaded application. If you replace it with ANY other
driver besides the original one specified, you are on your own.
You will get results, but I can not say what those results will sound like!!

------------------
Mike Maynard
Application Support Group
Eastern Acoustic Works
mike.maynard@eaw.com


Hello,
I wanted to post this reply to everyone to clear up the confusion
about the LA400 power ratings.

First, I will begin by saying that the LA400, DCS2, KF940, BH822,
BH760, all use the same driver, and that driver has never changed.

From the work that we have done in our labs, we have found that it is
possible, under certain conditions, to raise the RMS power handling of
this 12\\\\\\\\\\\\\\\" driver.

If you use an LA400 as a traditional subwoofer (just a low-pass and no
high-pass) the single 12\\\\\\\\\\\\\\\" driver has an RMS of around 500 watts @ 8
ohms.
If you use the standard low-pass and add a high-pass at 30Hz,
12dB/octave, you can increase the RMS rating to around 800 watts.

------------------
Mike Maynard
Application Support Group
Eastern Acoustic Works
mike.maynard@eaw.com


http://forums.eaw.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=4;t=000083#000001

http://forums.eaw.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=4;t=000114#000019

http://eshop.prodance.cz/DetailPage.asp?DPG=92882